How to Vet a Cold Room Supplier: 12 Questions to Ask Before You Pay a Deposit

A cold room is not a product you can inspect before it ships. It is a set of panels, doors, refrigeration units and controls that only becomes a working room after someone designs the load, matches the components, wires the controls and commissions the result on your site, eight thousand kilometres from the factory that made it. That is why supplier due diligence on a cold room order has to weigh engineering capability and after-sales reach more heavily than it weighs the unit price on the quotation.
This article gives twelve questions worth asking before a deposit is transferred, what a credible answer sounds like, and what should make you slow down. It is written for buyers ordering from a manufacturer abroad, but the same checks apply to domestic suppliers.
⚠️ Payment terms, deposit percentages and lead times mentioned below are industry-typical reference figures for planning discussion only. They must be replaced with your actual contract terms and your supplier's confirmed written commitments.
Why the equipment list is the easy part
Almost any supplier can send you a quotation with panel thickness, compressor brand and door count. Those numbers are copied between quotations, and the brands are the same across dozens of suppliers because the compressor market is concentrated. The differences that decide whether your project works sit one layer deeper: whether the cooling load was calculated for your product and your climate, whether the evaporator was selected at the right temperature difference, whether the defrost method suits what you store, and whether anyone will answer the phone in month fourteen when a fan motor fails.
A supplier who cannot discuss those four things is not a cold room supplier. They are a broker with a price list.
Group one: production capability
1. Do you manufacture the insulated panels yourself, or buy them in?
A manufacturer with its own continuous or discontinuous panel line controls thickness tolerance, density and foam quality, and can produce a non-standard panel size without waiting for a third party's schedule. A reseller buys standard sizes and quotes you a lead time they do not control.
Credible answer: names the line type, the density range they produce, and the maximum panel length they can run. Offers a video call from the production floor rather than a photo set.
Red flag: answers with a brand name instead of a process, or says "we have a partner factory" without naming what that partner does.
2. Which components are made in-house and which are bought in?
Panels, doors and sometimes cabinets are usually made in-house by a full-scope manufacturer. Compressors, controllers, valves and fans are bought from specialist suppliers. That split is normal and healthy — the problem is a supplier who claims to make everything.
Credible answer: a clear split, with the bought-in brands named and their model numbers traceable.
Red flag: "we make all parts ourselves." No cold room manufacturer makes compressors.
3. What is your actual monthly output, and how many orders are in the queue now?
Output is a proxy for whether your delivery date is real. Ask for the figure in square metres of panel or in rooms per month, and ask how many orders are already scheduled for the month your order would enter production.
Credible answer: a number consistent with the factory size shown on the video call, plus an honest statement of the current queue.
Red flag: a delivery date quoted before anyone asks about your specification, or a capacity figure that would require a plant several times the size of the one on camera.
Group two: engineering capability
4. Will you send the cooling load calculation, or only the equipment list?
This is the single most useful question in the list. A load calculation shows the assumption behind every number: product entry temperature, daily throughput, insulation thickness, ambient design condition, pull-down time and safety factor. An equipment list alone cannot be checked by anyone.
Credible answer: offers the calculation sheet, or at minimum a written breakdown of the load components and the evaporating temperature the capacity is rated at.
Red flag: capacity quoted in horsepower only, or in kW with no evaporating temperature attached. A unit rated at −10 °C evaporating loses roughly a third of its capacity at −25 °C, so a bare kW figure is not a specification.
5. Have you built this type of room before — same product, same temperature, same climate?
Cold room experience does not transfer cleanly between applications. A chiller room for vegetables and a −35 °C blast freezer share a panel supplier and almost nothing else: different evaporator selection, different defrost strategy, different door specification, different control logic.
Credible answer: names comparable projects with the product stored, the room temperature and the ambient condition, and can show the design decisions those projects forced.
Red flag: "we do all kinds of cold rooms" with no specifics, or reference projects that all sit at the same comfortable +2 °C to +8 °C range when you are asking for a freezer.
6. Who designs the control logic, and can I see a wiring diagram?
Controls are where imported cold rooms fail most often on site, because the panel is built to one electrical standard and the site is wired to another. The supplier should be able to produce a wiring diagram and a control sequence before shipment, not after the electrician arrives.
Credible answer: provides a wiring diagram and a defrost/fan/compressor sequence description, and asks what your site voltage and frequency are.
Red flag: "our engineer will explain on site." On-site explanation is not a design document, and a site visit is expensive to arrange when something is wrong.
7. What is the design ambient temperature, and what happens at 45 °C?
A condensing unit selected for 32 °C ambient will not hold the room at design temperature on a 45 °C afternoon. Buyers in tropical and Middle Eastern markets need the ambient condition written into the quotation, not assumed.
Credible answer: states the ambient the equipment is rated for and, if your site runs hotter, requotes with a larger condenser or a different unit.
Red flag: the ambient column is blank and the answer is "it will be fine."
Group three: delivery and documentation
8. How is the shipment packed, and who loads the container?
Panels are bulky and easily damaged at the edges. Doors are heavy and easily twisted. A supplier who has shipped before will describe edge protection, stacking order, and how the units are braced against container movement.
Credible answer: describes the packing method, offers loading photos, and can quote CIF or FOB with the port named.
Red flag: cannot describe packing without being prompted, or quotes a price that assumes the buyer arranges everything after the factory gate without saying so.
9. What documents come with the shipment?
For import clearance and for warranty later, the shipment needs a commercial invoice, packing list, bill of lading, certificate of origin where applicable, and the equipment manuals. For refrigerant-containing units, the refrigerant charge and type must be declared.
Credible answer: lists the document set without hesitation and confirms manuals in English.
Red flag: manuals only in the supplier's language, or no packing list until you ask.
10. What is the warranty period, and what does it actually cover?
Warranty terms vary widely and the wording matters more than the number of months. Ask separately about the compressor, the panels, the doors, the controls and the labour.
Credible answer: separates component warranty from labour, states who pays freight on a replacement part, and names the response time for a claim.
Red flag: a single number with no component breakdown, or "lifetime warranty" with no terms attached.
Group four: after-sales reach
11. Who supports commissioning, and in what language?
Commissioning is where a shipped kit becomes a working room. Ask whether the supplier sends a commissioning engineer, provides remote support, or hands you a manual and closes the ticket.
Credible answer: names the support channel, the language, the working hours and the escalation path, and can describe a recent remote commissioning.
Red flag: support is a personal mobile number with no backup, or the answer changes depending on who you ask.
12. Can you supply the spare parts list with the original order?
Parts that fail first are small, cheap and model-specific: fan motors, defrost heaters, door gaskets, controller boards, solenoid coils. Buying them later means air freight and a separate customs entry for a part worth less than its shipping.
Credible answer: attaches a spare parts list with part numbers and recommended quantities to the proforma invoice.
Red flag: "parts are available anytime" with no part numbers.
Three supplier types, and what each can actually deliver
| Supplier type | What they control | What they usually cannot do | Suitable when |
|---|---|---|---|
| Trading company | Price, paperwork, shipping coordination | Design the load, control panel quality, support commissioning technically | You have your own engineer and only need sourcing |
| Assembly workshop | Panel and door production, equipment assembly | Deep load calculation, controls design, multi-market documentation | Standard rooms, simple temperature range, experienced buyer |
| Full-scope manufacturer | Panel and door production, load calculation, unit selection, controls design, commissioning support | Nothing on this list — but verify the engineering depth, not just the claim | Non-standard temperature, unfamiliar climate, first import, or no in-house engineer |
The category matters less than the evidence. A trading company with a real engineering partner can serve you well; a "manufacturer" whose engineering is one salesperson with a spreadsheet cannot.
What a factory visit or video audit should actually show
Photos prove nothing. A video call is better, because you can ask to see things in a sequence the supplier did not prepare.
Ask to see, in one continuous call: the panel line running, the foam injection area, a finished panel being measured for thickness, the door assembly bench, and the warehouse where finished orders wait for loading. Then ask the person holding the phone to walk to the shipping area and show you the loading list for this week. A factory that is genuinely busy will have one. A rented warehouse used for a photo shoot will not.
Engineering tip: Ask the supplier to measure a random finished panel's thickness on camera with a caliper, and to state the density of the foam in that panel. Panel thickness tolerance and density are the two variables that most often ship below specification, and neither is visible after installation.
Engineering tip: Before paying a deposit, request the wiring diagram and the cooling load sheet for your specific project, not a generic sample. Reviewing those two documents takes an hour and reveals more about engineering depth than any brochure.
Payment structure that keeps the deposit recoverable
A deposit is normal. An unrecoverable deposit is not. The structure that protects both sides looks roughly like this:
| Stage | Typical share | Tied to |
|---|---|---|
| Deposit on order | 30% | Signed contract with specification annex |
| Before shipment | 70% | Loading photos and document set sent for review |
| Retention (negotiated) | 5–10% | Successful commissioning on site |
⚠️ These percentages are reference figures only and must be replaced with your actual negotiated terms. For first orders, a letter of credit or an escrow arrangement costs a small fee and removes most of the counterparty risk. If a supplier refuses any inspection before the balance payment, that refusal is itself information.
A short version, if you only ask five questions
If time is short, ask questions 4, 5, 6, 11 and 12. Load calculation, comparable projects, wiring diagram, commissioning support, spare parts list. Those five cover the gap between a quotation and a working room. A supplier who answers all five clearly, in writing, with documents attached, is worth a deposit. A supplier who deflects three of them is not, whatever the price.
The cheapest quotation in a tender is very often the one that omitted the load calculation. That omission does not reduce the cost of the project; it moves the cost to you, in the form of a room that does not hold temperature in summer.
Send us the product, storage volume, target temperature and site conditions — our engineers will come back with a preliminary scheme and budget range within 24 hours.
Email us 15898896999